Guide to Repair a Water Valve

Water valve relates to the valves which are widely used in the distribution systems or other plumbing systems. In facts, there is a wide range of the kind of the water valve. They are employed in certain conditions, affecting well as a role control he flow. As we all know that each mechanism can be poor in performance as time passes by, even can be wear out. Likewise, auto shut off water valve is possible to be in problem condition. For instance, the failure of the rubber washers is common. At this point, it is necessary to repair or replace it in time. And the replacement actually is a moderately easy process. Everybody can take it by himself.

The tools required are actually simple. They are the adjustable wrench, screwdriver, a variety of assortments of replacement washers.

Auto shut off water valve

First Of All, the water supply ought to be kept shutting off. A water meter is required to be found and located. Take the cover of the water meter off and auto shut off water valve on the incoming water pipe followed. Turn the valve with 90 degrees with the help of an adjustable wrench. But it ought to be remember not to be tightened too tight. Or Else, the gasket would fail to work, causing the inability of the shutting off performance.

Secondly, it's time to disassemble the auto shut off water valve. The screw and the handle ought to be removed. So does the attaching fittings. The problem washers are shown.

Thirdly, it is necessary to take the core step. Check all the broken metal parts and other parts. If it exists, it is necessary to replacing the whole valve. If not, keep on inspecting the rubber washers. If any of rubber washers is cracked, broken or out of its place, correct it and even replace it. Afterwards, replace the water gate and assemble the entire valve back tightly for further use. Finally, turn on the water supply to inspect the leakage. If any exists, repeat the previous steps again until no leakage exists. If not, all work has been successfully completed.